High-voltage Cable POWER CABLE YJLV-22 35KV COPPER CONDUCTOR

cables @ upwardcable.com Parameters of high-voltage cable High-voltage cable is a kind of power cable and means the power cable for transmitting the voltage within 10KV-35KV (1KV=1000V), and is mostly applied in the main road of power transmission. The executive standards of high-voltage cable product are GB/T 12706.2-2008 and GB/T 12706.3-2008. Detailed description Conductor: Copper or aluminum Insulation: Cross-linked polyethylene Filler: Filler strip Packaging: Wood shaft or packaging bag, depending on your requirement Outer sheath: Polyethylene Armoring: Fine steel wire armoring or steel tape armoring Service characteristics of high-voltage cable: This product is applicable to the fixed laying lines for power supply, transmission and distribution with AC rated voltage of 35KV and below. The maximum long-time operating temperature of cable conductor is 90℃, and in case of short circuit (not exceeding 5S at most), the maximum temperature of cable conductor is not greater than 250℃. Standard sectional areas: 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2. Type Name Application YJV YJLV Cross-linked polyethylene-insulated, PVC-sheathed power cable Cross-linked polyethylene-insulated, PVC-sheathed aluminum power cable Overhead, indoors, tunnel, cable trench YJV22 YJLV22 Cross-linked polyethylene-insulated, steel tape-armored, PVC-sheathed power cable Cross-linked polyethylene-insulated, steel tape-armored, PVC-sheathed aluminum power cable Indoors, tunnel, cable trench and underground YJV32 YJLV32 Cross-linked polyethylene-insulated, fine steel wire-armored, PVC-sheathed power cable Cross-linked polyethylene-insulated, fine steel wire-armored, PVC-sheathed aluminum power cable High drop, vertical shaft and underwater Note: Add ZC to