Lump ore screen

Lump ore screen The structure and characteristics : A. Block screen segment screening, screening machine overall vibration, vibration sieve screen and block the traditional vibrating screen is different, it is not involved in the whole vibration sieve machine, plate, top cover and the base are fixed, only the screen and the vibration exciter assembly in vibration. B. Self-cleaning screen block is composed of cantilever bar and frame bar is arranged in a longitudinal direction, and is provided with a self cleaning device, can maximize the elimination of the bond issue on the screen wet sticky ore. C. Closed structure block used in high concentration dust screen condition, usually made of closed structure, the dust cannot leak, in response to the requirements of environmental protection. D. Amplitude larger and smaller dynamic load block due to the screen and the screen vibration process characteristics of body vibration sieve, sieve machine so dynamic stress can be reduced to a minimum, so the amplitude can be greatly improved, it can greatly reduce the dynamic load. Overview: 1. Exciter and damping spring of lump ore screen are located within the screen box. 2.Vibrating part is completely contained inside the sieve, and the outside sieve body does not vibrate. 3. Using two motor drive. 4.Lump ore screen has a single-layer double-sided self-cleaning cantilever rods, maintenance-free exciter, combination of sealing structure and other components. 5.Exciter directly driven sieve plate vibration, and the sieve body does not participate in vibration. Amplitude :15mm-25mm. Features: 1.Vibration motor install in the sieve outside, is conducive to the maintenance of motor replacement. 2.Using single-layer double-sided self-cleaning cantilever rod, effectively solve the plugging