DR. PRP AMERICA, LLC

Product

• Dr. PRP Kit
• Make sure to tighten the lower cap at the bottom
• 4 Rotors with 4 50ml Carriers inside of Centrifuge
• If the PLASMA and RBC layer lies above the line centrifuge one more ti...
• FINAL RESULTS
• Dr PRP Processing
• This is how it should look after completing the 2nd separation
• Collect 18cc of Blood into the Syringe with the Anticoagulant
• Blood Draw kit
• Put the kit back into the centrifuge for the2nd separation
• Proceed 2nd Centrifuge 3200 RPM for 1 min which still counts as the 1s...
• Insert the Counter Weight With the Adaptor Ring Into the Carrier
• Extract PPP first
• Inject the Blood into the DR PRP Processing Kit
• This is the ideal line you are trying to achieve during the 1st separa...
• Place Counter Weight Though 1 Adaptor Ring and the Whole Blood Through...
• Adapter Rings for 50ml Carrier Specifically Designed for Dr PRP Centri...
• Set up RPM 3200 for 4 min for the 1st separation
• For the 2nd separation set RPM at 3400 for 4 min
• The highest concentration of PRP is the lower 2ml of the top chamber
• This is how it will look
• Take out the kit after the 1st centrifuge
• Orthopedic Clinic
• Draw 2cc Anticoagulant Into Blood Collection Syringe
• After 1st separation if result A is achieved centrifuge once more 3200...
• After completing the 1st separation push the blue rode all the way up ...