Plastic Moulding Company

Company Description

Plastic Moulding company is a leader among mould makers. Plastic Moulding Company main focus is creating the highest quality products. Plastic Moulding company is an america injection mould company. Our company concentrates on mould design and mould manufacture. The main products are Plastic Injection Mould, Injection Moulding and Custom Moulds. I spent a few years as an IMD specialist for a Tekra and Bayer films. The most helpful advice I can offer is to get all parties involved at the very beginning of the design phase- tooling, moulding, mould supplier, mould printer, mould former/trimmed (if not being done in house). Both the part and all the related tooling need to be designed as a team for a good chance of success- retrofitting for IMD after the fact is almost always a recipe for failure. If at all possible, make sure all partners in the project have IMD/IML background. I suggest Compression moulding with sheet moulding compound (SMC). We supply seats to the Jetski industry where they neeed high strength, impact resistence, light weight, modulus and thin cross sections. Are SMC fiberglass have these properties : Flex Strength > 85,000 psi Flex Modulus > 3.0 x 10 to the 6 psi Tensile Strength > 50,000 psi Tensile Modulus > 3.8 x 10 to the 6 psi Impact, notched > 33 Compression strength > 42,000 PSI moulding with harden steel match dies, good repeatability and fast cycle time. The SMC is also cost effective. As always, any starting pojnt for UV stabilization starts with a proper AO package, which need to comprise both primary- and secondary antioxidants. Choosing the filler is crusial as trace metals will reduce the UV stability. Coated grades of CaCO3 are less critical while unpure talcum will be the worst. The downside of the CaCO3 is that it will not provide the same level of stiffness as talcum in a like for like amount in final (due to the cubic morphology of CACO3 vs the platelet morphology of talcum). A mix of these fillers may provide a good balance.