POWDER ENAMEL CABINET

eneral The powder enamel cabinets is designed with 8 pieces enamel gun and 1 robot. Into the cabin a manual supplements door is opened. Enamel powder from inside the cab will be applied automatically. The enamel which comes from the cabinet are applied to the parts that enters to the cabinet. Some of the the enamel dust which don't adhered to the parts its poured into the cabin. In other parts pulled over filters by fans. The dust on the filter is poured into the cabinet with giving a shock to the vehicle cabinet. This shock continue at regular intervals. The dust Poured into the cabinet is sieved and is collected to recycling depot. The injector gun pistols which is located on tank fed with enamel dust extraction process also continues constantly. Freshly enamel is poured periodically to the tank in the cabinet and the system continues automatically continuously. Materiasl Type Used in Cabinet Cabinet Materials the interior are AISI 304 stainless steel and exterior surfaces are painted metal sheet steel . (Optionally Cr-Ni) In the cabinet for lightining 4x40 watt etanjl fluorescent lamps are used. Part Dimensions (Max): 500 x 1000 mm Conveyor speed: 3.5 m / min Electricity Mains: 380 V 500Hz Working Pressure: 6-8 bar (dry and oil-free air) Each robot Lining Enamel Cabinet:2, White Enamel Cabinet:1 Gun Lists: Lining Enamel Cabinet:12, White Enamel Cabinet:6 White Enamel Cabinet dimensions: Width: 1500mm - Height: 1700mm - Length: 4000mm Lining Enamel Cabinet dimensions: Width: 1500mm - Height: 1700mm - Length: 6000mm