Unnoted Round Corner R0.5 Tungsten Carbide Processing , Tungsten Steel Winding Head

PRODUCT DESCRIPTION Unnoted Round Corner R0.5 Tungsten Carbide Processing , Tungsten Steel Winding Head Introduction: We can produce the non-standard carbide winding sleeve according to the drawings of the automatic winding equipment. Technical parameters: The tungsten steel winding head is mainly used for the production and processing of enameled wire winding, requiring long-lasting service life, wear resistance and durability. High wear resistance is the basic requirement for mold products, especially for the long-term operating mechanical equipment such as progressive molds, combined molds and multi-station molds. The cemented carbide mold materials have the excellent performance of long-lasting operation. As a tool material, cemented carbide is a good choice for mold products due to its high hardness, high strength and high wear resistance. According to the actual production operation, we can provide tungsten steel mold parts non-standard customization, according to the customer's specific drawing and confirming the accuracy tolerance. The tungsten steel winding head is produced and processed according to the drawings. There are 6 special requirements: If the dimensional tolerances are not noted, we will produce in accordance with GB/T1804-f. And if the geometric tolerances are not noted, we will produce in accordance with GB/T1184-h. The outer surface roughness of the cemented carbide parts is Ra0.025, the roughness of the wire hole is Ra0.1, and the hole radius is R0.15. Unnoted round corner: R0.5. There are 20 wire holes of φ0.65, and the distance between them is 1.05mm, Hard alloy material hardness: HRA90 Tungsten steel material bending strength: 2300N/mm² Among them, the 20 through-holes have higher processing precision requirements. They must be consisten